February 9, 2019

Scuba Encounters

I had 3 dives in Mexico during our visit and had several unique and exciting animal encounters to share. The first dive at Land's End was also my first dive since 2011 but any apprehension I might have had quickly evaporated when my guide Julio dug around in the sand and produced tiny sea urchins which puffer fish would swim up and take right from your fingertips. They were very gentle but certainly had tough little teeth in there for crushing and grinding up urchin shells and spines.
It can be pretty difficult to give wildlife the space it deserves while also getting a decent photograph, but I decided to err on the side of caution with this moray eel and accept that my wide-angle lens would have to be pretty generously cropped for any photo to share. Still, this was my first wild eel and I was very excited to see one.
When we did a dive at the La Paz sea lion colony this one individual was very intrigued by bubbles and rings that our guide was blowing while lying almost on the bottom and came down to investigate and be patted. At this exact moment, Kathryn was actually snorkeling in a different spot and spent 20 minutes cuddling a juvenile sea lion, but unfortunately we only had the one underwater camera so that moment can't be shared with the rest of you :(

February 7, 2019

Sea Turtle Release

 We were unexpectedly delighted to learn that the resort we had chosen, Sandos Finisterra, was an active participant in sea turtle population rehabilitation. Sea turtles have less than a 1% survival rate to maturity on a good day and human impact on their environment has not helped, so efforts to improve their chances were a welcome sight.

Efforts by the resort are pretty substantial and not just feel-good as well. They have a staff biologist who gathers up buried eggs along the beach and places them in a protected enclosure where they are monitored and able to hatch in safety.
 The signs at the beach said they were Golfina turtles, which I believe are commonly known as Olive Ridley turtles in English. Every few days enough dug themselves up to the surface to be ready for a batch release into the sea and a crowd would always gather to watch the turtles head for the sea. The added bonus here is that a large crowd tends to keep away many of the birds that predate on these hatchlings and helped give them that little extra edge.
 Of course I was still not prepared for what a rough start they had to their lives. The beaches in Cabo are not swimmable due to strong rip currents and unpredictable waves so for us the area was walking-only. No such luck for these little guys as they struggled down the beach and into the surf. Most of the time a wave would come up and people would cheer, only for it to roll back having pushed half a dozen turtles 15 feet back onto the land and flipped them on their backs. Even when they did back it to the water, every large wave had dozens of little black bodies tumbling around in the chop. Not a easy lot in life.
Any turtles which were too tired or cold to make it into the water on the day were gathered up by the biologist and either warmed and released into the surf, or kept for another try on the following day depending on their state.

February 5, 2019

On Top of Mount Solmar

 Part of the view from our resort in Cabo San Lucas was a rocky peak in Land's End called Mount Santos. One evening as we were watching whales and frigatebirds at sunset, I noticed a small group of people standing at the top of the hill. From that moment I became set on climbing to the top and getting a full panoramic view of the whole end of the peninsula.
 The trailhead is accessible beside a dog obedience school and the owner Enrique leads the ascent himself twice a day along with a pack of puppers to help show the way. We had no problem with the trail but there are certainly parts where we were scrambling a bit, so I wouldn't recommend it for everyone. The path in the photo below is quite simple and near the start, but it does get trickier.

There had been some sort of unspecified problem a few months earlier so the gate to the hike is now locked except during the two guided jaunts daily. We would have liked to do it a little before the worst of the sun set in, but the only times available were 9:30 and 3:30. While we were concerned by the size of the group at the start, probably around 50 people, it thinned out significantly on the walk itself.
 The view from the top was totally worth it, as I hope the spherical panorama below can adequately convey. Kathryn was able to spot a number of humpback whales from the peak and the view of the harbor and city was spectacular.

We were also slow walking in order to try and take pictures without as many people in them and the downside to that was that the path was not super-well marked and a little easy to lose track of on the return. That was our fault for dawdling though, not a problem with the are.

February 3, 2019

Snorkeling with Whale Sharks

A key factor in why we chose Cabo San Lucas for our most recent holiday destination was the opportunity to snorkel with whale sharks. This experience turned out to be both incredible and absolutely nothing like I had expected it to be.

For starters, for the biggest fish in the world, they blend into their surroundings pretty well. There is a 30-foot shark in the picture below and I bet you wouldn't even know it was there if the species name wasn't in the blog title ;)
Documentaries present these animals as placidly swimming through crystal blue waters, but in actual fact they can REALLY move when they want to. I'm a reasonably fit guy and I struggled to keep up with them for even a minute or two in each of the 4 dives we did. I originally hoped to scuba with them but now understand how fast you need to be to see them at all. Unfortunately groups of divers are just too slow to reposition and trade off to ever stand a chance of seeing anything.

On top of that, the water was so thick with nutrients and plankton (which is what draws the animals to the area) that visibility is very limited and it can be tricky to see the shark until its practically on top of you. Which is pretty daunting when its 30 feet long and you're not supposed to be within 6 feet of it and its emerged RIGHT IN FRONT OF YOU.
 The image below is actually a composite of 3 video frame grabs from our goPro. Even with a very wide angle lens, capturing the entire animal in a single shot is nearly impossible, so I resorted to a little digital trickery to try and give you all a feeling for the size and shape of the whole creature. To drive home how large these animals can get, the ones we saw here were juvenile males and a full size adult can be more than 40 feet in total.
Hats off to the locals of La Paz for doing their part for conservation as well. Our guide provided us with wristbands which gave us access to the park area and there was an enforcement boat verifying we should be in the area within 10 minutes of arrival. They also watched from a distance to ensure that no more than 4 people were in the water at a time and that we didn't overstay our allotted limit.

December 24, 2018

Dueling Mergansers

 On a recent walk through Stanley Park, the winter gloom was lifted quite handily by a small flock of hooded mergansers. A group of six or so males had gathered the attention of a pair of females and were in competition with one another to try and win their attention. Hooded mergansers are some of our favorite ducks so we were very pleased to have this little window into their social lives.
 Hooded mergansers already have a lovely crest (as you can clearly see) which they can raise or lower depending on their needs. In this particular event it was all raised crests all the time as they stretched their necks, growled (more ducks growl than you expect apparently) and chased one another around.
 We don't have a good idea of how elaborate or drawn out their courtship rituals are or whether any of the group were paired up before we left, but who could resist this face?

December 23, 2018

Octopus Medallion

 Earlier this year I had designed an octopus-themed medallion for 3d printing and fabrication, but the toll the CPA took on my personal life pushed the actual completion back about 6 months. The original design came together in zBrush, which is an ideal program for creating lumpy creatures covered in tentacles and suckers. The only problem I find working in 3d, which is entirely my fault, is that its easy to put in details that will never print out or to forget just how heavy metal will be in the end.
 As evidence of this error, I printed the original design out at 2-inches across which sounds small when you're just looking at a ruler but comes out pretty beefy in real life. For a piece I had envisaged being printed flat, the 3d printer ultimately came up with a pretty crazy angle to print at. All the support scaffold on the bottom looks pretty neat but is really just cut away in the end.
 The final piece accidentally broke in the casting process since it had a greater volume than originally estimated so two batches of metal had to be poured into the mold in order to complete it. As a result it split down the middle but Andy was able to solder it back into one piece after I cleaned and filed the fragments. I actually quite like the look of it is this way and feel that the break adds character to the look of the piece.
The other blessing with 3d design is that its really easy to scale things down and try again, so this size will be a one-off attempt but we're going to try again with a smaller pendant as well as cufflinks and maybe even earring studs if the detail will hold up at such a small size.

October 27, 2018

Breach

Whenever I have been able to get a spare minute away from studying for the CPA this year, one of my ongoing projects has been doing some whale-themed jewelry design and fabrication with a small group of clever and experienced friends and artisans.

Way back in 2010 I bought a copy of zbrush but forgot all about it when I fell out of love of effects and ran away to be an accountant. All that changed when a friend of mine showcased some of the results you can get by casting 3d prints.

Fortunately, the makers of zbrush have one of the best customer service policies ever, and I was able to get the latest version as ongoing support for my original purchase. Mercifully I had not entirely forgotten how to work the software and after a few evenings of tinkering around I had come up with a pretty pleasing design. After many years of trying to be a jack-of-all-trades and model, texture, rig, animate, render, and composite my projects, it was pretty liberating to only concern myself with form and ignore everything else.
Now, I have made all sorts of 3d objects and animations, but none of them have ever crossed over from the screen into the real world before. So I was totally delighted and blown away when the talented guys at 3dsmith right here in Vancouver were able to realize my design to within 0.3mm as a print in resin.

The machines and process are pretty amazing (and worth a post in their own right some day) but the photo below clearly shows how they start out with a base and build up an armature to support the final result. The layers are printed so finely that you really can't see any banding in the surface of the object as its slowly built from the bottom-up.
3d prints are amazing from a technical standpoint, but resin can't shake the look and weight of cheap plastic. And that's where Andy at Uscochi Manufactory came in to save the day with a combination of patience and very old but proven techniques. The "lost wax method" has been updated for the 21st century by allowing the print to serve in the place of wax which is then burned out after being cased in plaster to create a mold. Once the casting process was complete, I got to step in and learn how to saw, file, sand and buff the piece until it was shiny and complete as you see below.
Huge thanks to everyone involved in the process and I really look forward to having the time to do some more work in this vein. After a few years away I really enjoyed reconnecting with my creative skills and collaborating with friends to make some new and totally unique artwork that would survive a hard drive failure.